Metallurgical Foundry Coke Fuel For Foundry Cupolas
video

Metallurgical Foundry Coke Fuel For Foundry Cupolas

Large-size metallurgical coke commonly used in blast furnaces and foundry cupolas.
Send Inquiry
Product Introduction

Large-size metallurgical coke typically ranges from 30mm to 150mm, commonly used in blast furnaces and foundry cupolas. These large lumps provide high mechanical strength to support heavy iron ore burdens and maintain gas permeability inside industrial smelting furnaces

Fixed carbon  90% 88% 86% 85%
Ash 8% 10% 12% 13.5%
Volatile matter 1.5% max 1.5% max 1.5% max 1.5% max
Sulfur 0.6% max 0.6% max 0.6% max 0.8% max
Moisture 5% max 5% max 8% max 8% max
Size 10-30mm 20-40mm 30-80mm 80-120mm 90-150mm 120-250mm

90-150

Foundry coke is widely used in iron‑making due to its unique physical and chemical properties. As the primary fuel for molten iron production in cupolas, foundry coke plays a vital role in melting furnace charge, superheating molten iron, supporting the stock column and maintaining good air permeability. For this reason, foundry coke features large lump size, low reactivity, low porosity, sufficient impact resistance and crushing strength, as well as low ash and sulfur content, making it well‑received in international markets.

coke coal

 

Common Large Sizes and Uses:

 

Blast Furnace (BF) Coke: Sized around 25 mm to 80 mm; provides structural support and carbon reduction in large iron-making furnaces. 

 

Foundry Coke: Larger lump sizes (often 4" x 2", 4" x 1", or 30–90 mm+); used in cupola melting because big sizes allow better airflow and intense heat generation. 

 

Nut/Breeze (Small sizes for comparison): Ranging below 25 mm, used for sintering or specialized heating rather than load-bearing smelting columns. 

 

80

Product Application Our foundry coke serves as main fuel for foundry cupolas for molten iron smelting. Metallurgical coke applies to blast furnace iron‑making and sinter plant production.

 

Core Chemical & Physical Indexes Highlight fixed carbon, ash content, sulfur, phosphorus, lump size, crushing strength, CRI, CSR, porosity, reactivity. These are what buyers search.

 

Supply Capacity & Export Service Bulk supply, full container sea shipment, inspection support, flexible specifications according to buyer's requirements.

 

Target Customers Foundries, casting factories, sinter plants, blast‑furnace mills, coke importers and trading companies.

 

Call‑to‑action Contact us to get detailed specification sheet, test report and competitive export offer.

 

foundry hard coke

Hot Tags: metallurgical foundry coke fuel for foundry cupolas, China metallurgical foundry coke fuel for foundry cupolas manufacturers, suppliers, factory, Ash 10 Foundry Coke, Ash 12 5 Foundry Coke, Ash 12 Foundry Coke, Ash 8 Foundry Coke, foundry coke

Send Inquiry

whatsapp

Phone

E-mail

Inquiry